Autoclave 21 L

HOME > Peripherals > Autoclaves


·         Horizontal autoclave for sterilization with wet saturated steam. Sterilizes in an efficient, fast and safe manner all critical or semi-critical materials of medical and dentistry use. Its efficiency is based on three basic factors: wet saturated steam temperature; exposure time and lethal-effect pressure for any microorganism.

·         Aluminum casing with epoxy painting, ensuring it a high-level finish, without risk of oxidation, measuring 670mm depth, 460mm width, 400mm height and 32Kg weight.

·         Sterilization chamber insulated with glass wool layer, manufactured in stainless steel AISI 304–18/8, with 21 liters, covering a space sufficient to sterilize surgical cases and packs; support with two removable, perforated aluminum trays enables full cleaning of the internal chamber; heating element externally connected to the chamber, avoiding undesirable contaminations and inlay deposits occurring in immersion heating elements.

·         Dimensioned for use above dental sinks and cabinets, not requiring auxiliary furniture or adaptations outside the dentistry standards.

·         Chamber door in matte aluminum with high pressure resistance; door sealing system with high performance silicon gasket resistant against temperature and pressure variation; door with external guard in high-impact structured polystyrene plate prevents user from touching hot parts of door with its hands and avoids steam produced from reaching the user when opening the door; door lock with lever located at autoclave left side.

·         Manual replenishment of chamber with distilled water until the mark indicated in reservoir, by using a measuring cup for dosing the water volume.

·         Valve with automatic opening against overpressure of sterilization chamber if exceeding 3.0 Kgf/cm2 and overheat sensor shuts down the heating element if the temperature exceeds the adjusted limit; 654 W power.

·         Command panel with led door indicates if the door is opened or closed, led heat indicates if the heating element is on or off; start switch to begin the cycle; on/off switch; thermal manometer indicates the pressure/temperature inside the sterilization chamber.

·         Predefined default autoclaving after the operating pressure and temperature are reached with 8-minute cycle, wet saturated steam at 134ºC of temperature and pressure of 2.3Kgf/cm2 for unpacked, enveloped and packed materials and instruments.

·         Electric-electronic devices offer protection against unexpected events.

·         Automatic exhaustion occurs at the end of the cycle, the pressure gauge will reset and the autoclave will issue a sound signal, all the internal steam is drained to the exhaust disposal vat or to a special waste piping; with the door half open and heating element off, the drying starts with a cycle of up to 30 minutes.

-         Includes a hose and clamp and water dosing cup for refill.

·         Device subject to a strict testing process with chemical and biological indicators during the qualification and receives the exclusive 3M certificate seal, which ensures its sterilization quality.

Model: 21 L

Sterilization pressure: 2.3 kgf / cm² ± 0.2 kgf / cm²

Operating Temperature: 134 ° C

Sterilization time *:15 minutes (Depending on the material to be sterilized after reaching the operating pressure and temperature)

Power supply: 220V-50 / 60Hz-3.0A-654W


Depth: 670mm

Width: 460mm

Height: 400mm

Weight: 2kg